Allied Data Quatron TA128 Modem Driver
V VDSL2 Modem Router. The ADTV is an Ultra-high Data Rate at up to Mbps CPE with up to Mbps for downstream and 50Mbps for upstream Missing: Quatron TA Samsung NPV4AI Series 3 Notebook WWAN Y Data Card Modem Driver Allied Data Quatron TA Modem Driver, 1 KB / Windows 9X. Allied Data. Allied Data offer 3 product lines: TRON for professional users, Business-to-Business and industrial solutions, Allied Data Quatron TA Modem Driver.
Type: | Driver |
Rating: | 3.69 43 (3.69) |
Downloads: | 416 |
File Size: | 6.48Mb |
Supported systems: | ALL Windows 32x/64x |
Price: | Free* [*Free Regsitration Required] |
Allied Data Quatron TA128 Modem Driver
For clarity commands must be separated from each other by spaces.
The spaces count towards the total length of the command line. A command is sometimes followed by a parameter number. If the parameter is 0, it may be omitted.
Allied Data Windows Driver Downloads, Page 5
From the letters AT at the beginning of the command line the modem identifies the baud rate and parity of the terminal and configures itself accordingly. The rates which are recognised automatically Allied Data Quatron TA128 Modem,19, 38, 57, andbps. Allied Data Technologies 7 10 The modem can recognise data formats with 7-bit or 8-bit characters, with even, odd or no parity bit and with one stopbit.
You will find a list of all the commands in the previous section. For each command the factory default setting is given. Generally there is no need to change the default setting.
NewSoftware 版 (精华区)
You can also use the command ATS to set the S register. For more information see ATS.
Read S register This command displays the setting of the selected S register. If no carrier is detected during the period specified in register S7 default 60 secondsthe modem is switched off line.
Drivers Modem Free Download
Any character entered while the connection is being established immediately clears the attempted connection. During a connection with error correction, the break signal is sent by the active error correction protocol, but without an indication of the length.

This only applies to connections without error correction. This mode can only be used with a connection with error correction.
The number is displayed between the first and second 'RING' see example. The command is as follows: This example shows the non-standard format of CLI.

Opening and closing characters are added. The opening character is a 'D' hex 44the closing character is a 'C' hex Allied Data Quatron TA128 Modem If you do not specify a telephone number, the modem will be put on line and will try to establish a connection in originate mode.
Allied Data Windows Drivers Download (Page 5) Free Driver Downloads and Driver Updates
The modem waits for the time specified in register S7 default 60 seconds for a carrier to establish the connection. You can use full stops for Allied Data Quatron TA128 Modem. Brackets, hyphens and spaces are ignored. The modem is switched off line during the time set in register S W Wait for a dialling tone. The modem waits for a dialling tone before the requested number is dialled.
If no dialling tone is detected within the time specified in register S6, the modem is switched off line and you will see the error message "NO Wait for silence: The modem waits for silence on the line for at least 5 seconds before Allied Data Quatron TA128 Modem next dial command is carried out. If detection of the engaged tone is switched on, you will get the message "BUSY".
If the modem detects an answer tone before the waiting time has expired, the connection will be established. L Repeat last number: